How to Remove Hard Water Stains The Easy Way
If your once sparkly clean and stain-free faucets, mirrors, and glass door are now unsightly, it’s probably water stains. Oftentimes, the stain is a chalky white stain that settles on these surfaces. Luckily, you can restore the beauty of these items by eliminating this stain. And in this guide, we’ll highlight how to remove hard water stains the easy way. Let’s start:
What are hard water stains and how does it form?
If water has a higher concentration of minerals, especially iron, calcium, and magnesium, then it’s categorized as hard water. And the stains develop when water droplets on a surface evaporate and leave behind a chalky deposit. This deposit can also be brown in some instances, and the major components are minerals from the water. Over time, the mineral build-ups and toughens.
Removing Hard Water Stains
Well, there are several methods you can leverage to remove it. Luckily, they are simple and require supplies that you can easily get from your kitchen. That being said, you can use a hard water cleaning product, vinegar, or baking soda plus vinegar. The option you decide to work with depends on the surface you’re working on. Let’s begin:
Removing Hard Water Stain from:
You’ll need a few supplies to eliminate the hard water stain from a drinking glass. In this case, vinegar and a large basin will do.
First: Heat the vinegar in a microwave to warm it up. Thereafter, transfer to a basin.
Second: Dip your glass into warm vinegar and let it sit for 10 minutes. Meanwhile, ensure all the sides have their turn in the warm vinegar.
Third: Thereafter, remove the glass from the vinegar after 10 minutes, and then sprinkle it immediately with baking soda. Use a generous amount of baking soda to cover the glass completely.
Fourth: The final stage is rinsing the glass. But before that, rub the baking soda on the glass gently. It will help scrub off the stain from the glass surface. You can dry it up afterward to check the outcome.
Bathtub and Shower Walls
If your bathtub or shower walls have hard water stains, that shouldn’t bother you. You’ll need vinegar and water to remove it. First, mix equal volumes of vinegar and water in a spray bottle. Shake the mixture and thereafter, spray it on the surfaces with a hard water stain. After leaving it for 15 minutes, you can wipe it off and rinse the surface. This should reveal a clean and stain-free surface.
Sinks are potential areas for hard water stain build-up. Whether it’s the kitchen sink or those in the bathroom, they can develop this stain easily. In this step, we’ll look at how to eliminate water stains from a chrome sink. To begin, prepare a solution with an equal amount of vinegar and water.
First: Dip a dry cloth in this mixture and allow it to soak. Thereafter, take it out and wrap it around the sink and its fixtures. Let it sit for not less than 10 minutes.
Second: Unwrap the sink and its fixture, and then gently scrub it. Rinse it well and then dry it up by buffing. If necessary, you can repeat this step.
Third: Does your sink have an aerator? Well, if it’s removable, you can use the same solution to clean it up. Simply remove it and dip it in the same solution for a few minutes. Then remove it and use a clean toothbrush to scrub off the mineral stains. Thereafter, rinse it thoroughly.
If you notice your shower stream is no longer powerful, then mineral build-up must be one of the major causes. It must be jamming the nozzle and the shower head. Fortunately, you can use a few domestic supplies to unclog it. You’ll need white vinegar and a toothbrush.
First, soak the toothbrush in the vinegar, and then use it to scrub and unblock the water jet. Thereafter, use a clean cloth to wipe it. Afterward, turn on the shower and allow the water pressure to blast off the remaining residues. Alternatively, you can remove the showerhead and dip it in vinegar for a few minutes. However, this can damage the finish on it, especially if it’s a metallic shower head.
When eliminating the tough water stains from your toilet, you’ve got two major options. First, you can use a homemade or DIY cleaning solution or buy a toilet cleaning product. When it comes to toilet cleaning products from the store, there are those specifically for hard water stains. Simply get one you prefer and apply on the spot affected. Thereafter, use the toilet brush to scrub the surface before rinsing it by flushing the toilet,
If you prefer a DIY solution, there’s a potent solution you can opt for. In this case, you’ll need baking soda and vinegar to prepare your cleaning product.
First: take one cup of vinegar and then apply it around the toilet bowl (inside). Ensure it covers all the surfaces with water stains. Using a toilet brush, swirl it around and leave it that way for 60 seconds.
Second: measure one cup of baking powder and sprinkle it on the toilet surface. Thereafter, take another cup of vinegar and sprinkle on the baking powder. Allow the mixture to settle for 10 minutes and work on the stain.
Third: Using the toilet brush once more, swirl the mixture around to cover all the stains in the toilet bowl. Allow the solution to settle for half an hour. Afterward, take the brush and swirl the mixture once more to scrub off the remaining water stains.
Fourth: Flush your toilet to eliminate the stains. If you notice some persistent stains, repeat the same steps one more time.
Removing the hard water stains from the surfaces is as easy as you can read from above. However, it requires patience and persistence. Unfortunately, this is not a luxury that many of us can afford. Thankfully, there’re professional commercial cleaning services that can provide you with this service.
Contact Equinox Cleaning Company, New Jersey for the best hard water stains removal services. Their packages include commercial premises and residential buildings. Depending on the plan you want, reach out for more info.