You are currently viewing How to Remove Candle Wax From Any Surface

How to Remove Candle Wax From Any Surface

  • Post author:

How to Remove Candle Wax From Any Surface

Candles are a staple of any festive occasion. How to Remove Candle Wax. Whether it is a honeymoon, a birthday, a romantic evening, or just a day of celebration, candles have become an integral part of it.

However, when lighting these candles up, an issue you might face is the wax that falls off from them. Usually, if you act quickly, the wax is quite easy to remove. Sometimes, you tend not to notice it immediately, and it leaves a nasty mark wherever it drops. In this article, we are going to talk about how you can clean candle wax.

How to Remove Wax From Leather?

Leather is one of the most common places where Candle Wax might turn into an issue. For starters, to clean the candle wax, you can try a dry microfiber cloth.

If that does not seem to work, try pressing a plastic bag full of ice wrapped in a towel onto the surface. Once you see the wax harden, use a scraper to remove the excess wax.

How to Remove Wax From Carpet?

We recommend that you go for a few ice cubes in a plastic bag for cleaning candle wax off a carpet. The same method we used for Leather. However, once the plastic has hardened, use a dry microfiber cloth to scrape off any remaining particles.

Wax on the carpet usually leaves a smell as well. So, we recommend thoroughly cleaning the spot after you are done taking the wax off.

How to Clean Crayon / Candle Wax from Walls?

Children writing on Walls is the same as Candle Wax falling on them. To clean candle wax off walls, you can use a dry microfiber cloth for hard stains.

If the stain seems to be particularly soft and hard to remove, you can then use your hairdryer and turn it up to max and let it do its work. You should be able to scrape the wax off using the same dry microfiber cloth you used earlier.

How to Remove Wax From Wood?

Wood is perhaps the hardest and most damaging object where candle wax can leave a mark. To clean candle wax from Wood, we recommend that you do not scrape it with even a dry microfiber cloth as it may leave marks.

Use your hairdryer as you did before and try to clean off the wax residue as quickly as possible as soon as you feel it is dry enough. After this, you should still be seeing some stains of the wax on your Wood.

To remove the stains, we recommend using vinegar or any alcohol solution that can dissolve whatever’s left of the candle wax on the surface.

If wax does end up falling on your wooden floor or any piece of wooden furniture, we recommend that you clean the candle wax as soon as possible, as letting it stick further to your Wood will lead to scratches.


Candle Wax is very easy to get rid of if you act fast and know what you are doing. Usually, a few ice cubes will suffice for most surfaces, but we have mentioned surfaces where you should not be trying this method.

In conclusion, cleaning candle wax usually requires ice cubes, a hairdryer set to maximum strength, a dry microfiber cloth, and a lot of patience!


How do you get dried wax off?

For this WAX removing method, you will need mineral oil. Dip a cotton pad in mineral, massage, or olive oil. Make sure the oil is warm instead of cold oil as it works better and faster. Hold the soaked cotton pad on the Wax residue until it’s saturated — approximately two to three minutes. Wipe off the Wax residue with another clean cotton pad.

What chemical will dissolve candle wax?

Candle wax is an oil-based stain, so you will need a solvent that can dissolve oil. Several solvents can do the job, but only a few can be found in a house. The most typical are nail polish remover (Acetone) and rubbing alcohol (isopropyl alcohol).

Does vinegar dissolve candle wax?

Spilled candle wax is relatively easy to remove with the help of white vinegar. All you need is to heat the affected area (wax) with a hairdryer and then remove it with a paper towel/rage. Remove any leftover wax with a rag/paper towel soaked in a mixture of half water and half vinegar.

How do you get wax off a stone surface?

Harden the affected area (WAX) by setting an ice and water-filled plastic bag on it. Scrape off the WAX as much as possible and then use mineral spirits/acetone to remove the Wax’s rest from the stone surface.

This Post Has 2 Comments

  1. Avatar for Equinox

    Scrape away any excess wax. Lay a damp cloth over the wax-stained area and apply light pressure and medium heat with a clothing iron. The cloth will begin to absorb the wax from the affected surface. Clean up any remaining residue with a mild detergent and a new damp cloth.

Leave a Reply